HomeFaxSending (Basic operation flow)

Sending (Basic operation flow)

  1. Load the original.

  2. Tap [Scan/Fax] on the main menu of classic style.

  3. Specify the destination.

  4. Configure the option settings for fax transmission as necessary.

    • For details on option settings, refer to Here.

  5. Use the Start key to start transmission.

    • If necessary, tap [Check Setting] before transmission, and check the specified destination and settings.

    • If the screen to confirm the specified destination or settings appears, check the contents, then tap [Send].

    • If the keyboard screen appears, enter the specified password, then tap [Send]. For the password, contact the administrator of this machine.

    • Using the Stop key enables you to stop scanning the original. A list of the currently stopped jobs is displayed. To stop transmission, select the target job from the list, and delete it.

  • The sender information is automatically added to a fax to be sent when registered.

  • [Basic Setting] - [Default Scan/Fax Settings] (Here)

  • [Function ON/OFF Setting] - [Destination Check Display Function] (Here)