HomeDescriptions of Functions / Utility KeysPunch Regist Loop Size Adjustment

Punch Regist Loop Size Adjustment

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [Punch Regist Loop Size Adjustment]

If the positions of the punch holes on the paper are not in parallel with the paper edge, use this option to correct the obliquity of the paper to make them parallel.

bizhub C658/C558/C458: This adjustment is possible when the Finisher FS-537/FS-537 SD and Punch Kit PK-523 are installed.

Settings

Description

[Finisher]/[Post Inserter Feeder Upper Tray]/[Post Inserter Feeder Lower Tray]

Select the position subject to paper inclination adjustment.

  • [Finisher]: An adjustment is possible when the optional Finisher and Punch Kit are installed on the machine.

  • [Post Inserter Feeder Upper Tray]/[Post Inserter Feeder Lower Tray]: An adjustment is possible when the optional Finisher FS-537/FS-537 SD, Punch Kit PK-523, and Post Inserter are installed on the machine.

[Paper Type]

Select the type of paper that is used to adjust the inclination.

[Adjust Value]

Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].

  • [+]: Tap this button to adjust the inclination of the paper.

  • [-]: Tap this button if it is not possible to adjust the inclination with [+] or paper creases.

[0.0 mm] is specified by default.

bizhub C658/C558/C458: This adjustment is possible when the Finisher FS-536/FS-536 SD and Punch Kit PK-520 are installed.

bizhub C368/C308/C258: This adjustment is possible when the Finisher FS-534/FS-534 SD and Punch Kit PK-520 or the Finisher FS-533 and Punch Kit PK-519 are installed.

Settings

Description

[Paper Type]

Select the type of paper that is used to adjust the inclination.

[Adjust Value]

Enter an adjustment value between -4 and 4 by tapping [-] and [+].

  • [+]: Tap this button to adjust the inclination of the paper.

  • [-]: Tap this button if it is not possible to adjust the inclination with [+] or paper creases.

[0] is specified by default.

  • Make adjustment while checking a sheet of paper having punched holes that are not in the correct positions.